Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 233

CAUTION:
• Pull the lever [1] to unlock it, grasp the handle [A] on the left and right, and pull the ITB Unit [2] to the position in the
figure below while shifting it to the left side.
• Pull the lever [1] to unlock it, grasp the handle [A] on the left and right, and pull the ITB Unit [2] to the position in the
figure below while shifting it to the left side.
• Align the triangle mark in the guide on the left with that in the ITB Unit, place the shaft [A] of the ITB Unit [1] on the rail
[B] of the guide, and install the unit while shifting it to the left.
[B]
[A]
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > TR-UNIT
When TR-UNIT is cleared, T-CLN-BD/ TR-BLT/ TR-ROLK/ TR-ROLC are also cleared at the same time.
Left Side
Left Side
211
4. Parts Replacement and Cleaning