Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 139

Related alarm codes
• 04-0007: MP Tray Lifter error
• 04-0017: Multi-purpose tray paper feed retry error
■ Multi-purpose Tray paper detection
Presence/absence of paper on the Multi-purpose Tray is detected by the Multi-purpose Tray Paper Sensor (PS03).
■ Multi-purpose Tray Automatic Size Detection
The size that is displayed is determined by the settings of automatic paper size detection.
The paper size shown below to which automatic size detection is performed is determined according to the setting of "Settings/
Registration > Preferences > Paper Settings > Paper Size Group for Auto Recognition in Drawer".
Location
US
CN
Locations other than
above
Automatic size detection is performed by three sensors.
• Multi-purpose Tray Width Sensing PCB (UN29): Detects paper width
• Multi-purpose Tray Paper Length Sensor 1 (PS30): Detects paper length
• Multi-purpose Tray Paper Length Sensor 2 (PS31): Detects paper length
■ Long Length Paper
This machine supports long length paper.
1. Long length paper with 457.3 to 1200 mm in length can be used in the Multi-purpose Tray pickup by changing the setting of
service mode (MF-LG-ST) to "1".
COPIER > OPTION > USER > MF-LG-ST
2. Configure the long original mode in the following mode after changing the service mode setting.
[Copy] > [Other Functions] > [Long Original]
When setting Long Original, paper cannot be delivered to the Third Delivery Outlet.
List of Paper Size by Location
Inch size
A/K Size
A/B size
Default setting
117
2. Technology