Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1056

5.
CAUTION:
Be sure that the Support Member does not come off
when the Inner 2-way Tray is lifted up.
6.
Connect the power plug to the outlet.
7.
Turn ON the main power switch of the host machine.
Checking after Installation
NOTE:
The setting of "ON/OFF of Use Optional Output Tray" can
be made only when logged in as an administrator.
When "System Manager Information Settings" is set, it is
required to log in as a system manager in accordance with
instructions of the user administrator.
Password at the time of shipment
• System Manager ID: Administrator
• System PIN: 7654321
1. Set the value of the following service mode to "1".
COPIER > OPTION > ACC > IN-TRAY
2. Turn OFF and then ON the main power.
3. Check that the following menu has been added.
• [Settings/Registration] > [Function Settings] >
[Common] > [Paper Output Settings] > [Tray
Designation]
4. Press [Tray Designation].
5. According to the user's request, set the function of
delivering paper to the Tray A/B/C and the priority order
of the trays, and press [OK]. The priority order is
displayed as "1", "2", and "3".
6. Check that the behavior is in accordance with the
settings.
1034
9. Installation