Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 863

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
POL-SCAN 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-SBOX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-DFAX 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-REP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-FREP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF Rights Management Server set dspl
When "1: Display" is set, the Rights Management Server function screen is displayed.
While the Rights Management Server function is a standard feature, it is possible to hide if not
necessary.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
It differs according to the location.
Setting of linking with Advanced Box:SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the link with Advanced Box when iW SAM is enabled.
When 1 is set, linking with Advanced Box is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of direct fax transmission: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the direct fax transmission when iW SAM is enabled.
When 1 is set, the direct fax transmission is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of TX Report with image: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the TX Report with image when iW SAM is enabled.
When 1 is set, the TX Report with image is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of Fax TX Report with image: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the Fax TX Report with image when iW SAM is enabled.
When 1 is set, the Fax TX Report with image is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
841
8. Service Mode