Quick Startup; Other Settings - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

Function Settings > Receive/Forward
• Fax Settings >Select RX Mode > Fax/Tel (Auto Switch) (*1)
• Fax Settings > Remote RX > ON (*1)
• Fax Settings > Set Number Display > ON (*1)
Function Settings > Send
• Fax Settings > Modem Dial-in Settings > ON (*1)

Other Settings

• Volume Settings key > Fax Volume Settings > Incoming Fax Ring > ON (*1)
*1: This may not be displayed depending on the country, model, and configuration of the options.
*2: This must be already registered on Google Cloud Print in advance.
Hardware status
• It is connected to the coin vendor.
System Performance Status
• The system is running/communicating.
CAUTION:
The system is in a running/communicating state for approx. 10 minutes after startup in many cases.

Quick Startup

To realize faster startup, power configuration has been changed to always supply power to the Main Controller PCB at quick
startup. Consequently, the main menu can be displayed faster than the normal startup.
Even when the Main Power Supply Switch is OFF, power is supplied to the following PCBs:
AC Driver PCB
Low-voltage Power Supply PCB
Main Controller PCB
Areas supplied with AC
Areas all-night power supply
1) Quick Startup ON :
Power Supply SW_OFF
Energize to 1,2,3
2) Quick Startup OFF :
Power Supply SW_OFF
Energize to 1,2
3 Main Controller PCB
2 Low Voltage
1 AC Driver PCB
Quick startup setting ON
Power Supply PCB
Power is supplied
Power is supplied
Power is supplied
129
2. Technology
Quick startup setting OFF
Power is supplied
Power is supplied
OFF