Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 655

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > DENS
SOFST-R1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Appropriate Target Value
Related Service Mode
Additional Functions
Mode
Amount of Change per
Unit
POFST-F2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Appropriate Target Value
Related Service Mode
Additional Functions
Mode
Amount of Change per
Unit
Pch Sns (R) light-RX charcs: weak, Swave
To enter the characteristic value of leakage light (S-wave) when the light intensity of the
Registration Patch Sensor (Rear) is weak.
When replacing the Registration Patch Sensor Unit, enter the value written on the label included
in the package of a new one and write the value in the service label.
- When replacing the Registration Patch Sensor Unit
- When replacing the DC Controller PCB/clearing RAM data (When backup/restoration cannot be
performed)
Enter the setting value, and then press OK key.
After replacing the Registration Patch Sensor Unit, enter a series of values written on the label,
and execute auto gradation adjustment (full adjustment/quick adjustment).
0 to 999
mV
50
COPIER> ADJUST> DENS> POFST-F1/F2/R1/R2, SOFST-F1/F2/R2, PALPHA-F/R
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust, Quick Adjust
1
Pch Sns (F) light-RX charcs: strg, Pwave
To enter the characteristic value of leakage light (P-wave) when the light intensity of the
Registration Patch Sensor (Front) is strong.
When replacing the Registration Patch Sensor Unit, enter the value written on the label included
in the package of a new one and write the value in the service label.
- When replacing the Registration Patch Sensor Unit
- When replacing the DC Controller PCB/clearing RAM data (When backup/restoration cannot be
performed)
Enter the setting value, and then press OK key.
After replacing the Registration Patch Sensor Unit, enter a series of values written on the label,
and execute auto gradation adjustment (full adjustment/quick adjustment).
0 to 999
mV
200
COPIER> ADJUST> DENS> POFST-F1/R1/R2, SOFST-F1/F2/R1/R2, PALPHA-F/R
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust, Quick Adjust
1
633
8. Service Mode