Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 321

11. Remove the screws [3] of the Adjustment Plate A [1] and the Adjustment Plate B [2], and change the installation holes [4] to
execute fixing alignment adjustment.
• If the image on the front side has shrunk [a], move the Adjustment Plate A and the Adjustment Plate B upward for the
same divisions of the scale.
• If the image on the front side has enlarged [b], move the Adjustment Plate A and the Adjustment Plate B downward for
the same divisions of the scale.
[c]
12. Install the parts in the reverse order from step 10 to step 1.
13. Output the image where the symptom occurred, and check that the symptom does not occur.
If the symptom persists, check for other factors.
■ Display of "Non-Canon Product" Message
The following shows the remedy to be performed when a "non-Canon product" message is displayed even though Canon-made
toner is used.
Remedy:
Perform a remedy according to the instruction of the alarm.
[a]
REAR FRONT
[b]
REAR
299
6. Troubleshooting
FRONT