Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 798

COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
SIPAUDIO 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
SIPINOUT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
SIPREGPR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
VLAN-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
Set of SIP session establishment order
To set whether to establish audio session or T.38 session first with SIP.
Usually, audio session followed by T.38 session is established when using IPFAX in an intranet
environment. However, this order is not specified by the standard.
Set 1 when connecting the SIP server or terminal where the session starts with T.38 session.
When connecting the SIP server or terminal where the session starts with T.38 session
Enter the setting value, and then press OK key.
When 1 is set, IPFAX fails with the destination where the session starts with audio session.
0 to 1
0: audio, 1: T.38
0
SIP: Session Initiation Protocol
Set of internal/external number to URI
To set whether to store the external number or the internal number in From URI when using NGN.
When a call cannot be made with external number while using NGN
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: External number, 1: Internal number
0
NGN: Next Generation Network
URI: Uniform Resource Identifier
Setting of registrar server use protocol
To set the protocol used for communication with registrar server.
Although the protocol that is the same as the one for proxy server is usually used, another protocol
can be used in accordance with user and environment.
Upon user's request (to use a protocol different from the one for proxy server)
Enter the setting value, and then press OK key.
0 to 3
0: Protocol set in Settings/Registration menu, 1: UDP, 2: TCP, 3: SSL
0
Preferences> Network> TCP/IP Settings> SIP Settings> Intranet Settings
ON/OFF VLAN participation packets send
To set whether to send packets for participating in dynamic VLAN at link-up.
When participating in dynamic VLAN
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
0
- VLAN (Virtual LAN): A method for realizing grouping of terminals depending on the hub, switch
connection port, MAC address, protocol, etc.
- At link-up: At startup, when LAN cable is connected, when recovering from deep sleep, when
pressing the button to reflect the setting (dynamic update)
- If IP address of the machine has not been set, an IP address is assigned after participating in
VLAN.
776
8. Service Mode