Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 843

COPIER (Service mode for printer) > OPTION (Specification setting mode) > IMG-FIX
FIX-RTTH 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
■ CUSTOM
COPIER (Service mode for printer) > OPTION (Specification setting mode) > CUSTOM
TEMP-TBL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
SC-L-CNT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
ON/OFF horz line prev:heavy, coat, trnsp
To set whether to rotate the Fixing Pressure Roller and the Fixing Film after 36 hours have passed
from completion of fixing operation.
Keeping the Fixing Pressure Roller and the Fixing Film engaged at a position for a long time may
cause deformation of the Fixing Film. If it causes appearance of horizontal lines at 75 mm intervals
on heavy paper, coated paper and transparency, set 1. When sleep state continues for 36 hours
after completion of fixing operation, the Fixing Pressure Roller and the Fixing Film rotate
automatically for approx. 1 second. The fixing nip moves so that deformation of the Fixing Film
can be prevented.
When horizontal lines appear at 75 mm intervals on heavy paper, coated paper and transparency
Enter the setting value, and then press OK key.
- This setting is enabled only at sleep. It does not work when the power is OFF.
- When setting 1, replace the Fixing Film Unit. At the time of appearance of horizontal lines, the
Fixing Film has been already deformed.
0 to 1
0: OFF, 1: ON
0
It actually takes approx. 3 seconds for the serial operations of engagement, temperature control,
rotation, stop and disengagement of the Fixing Pressure Roller and the Fixing Film.
Set fixing control temp: plain 1
To set the offset of fixing control temperature for plain paper 1 (64 to 75 g/m2).
As the value is changed by 1, the control temperature is changed by 5 deg C.
Increase the value when a fixing failure occurs, and decrease the value when fixing offset occurs.
When a fixing failure/fixing offset occurs on plain paper 1
Enter the setting value (switch negative/positive by -/+ key) and press OK key.
-2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
deg C
0
Set large paper jdgmt reference at scan
To set the judgment reference of the scan counter as to which to use B4 or LTR to determine large
size.
The threshold is determined by the combination with the setting of B4-L-CNT.
SC-L-CNT=0, B4-L-CNT=0: paper exceeding B4 is determined as large size, paper with B4 or
smaller is determined as small size.
SC-L-CNT=0, B4-L-CNT=1: paper with B4 or larger is determined as large size, paper smaller than
B4 is determined as small size.
As needed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: B4 size, 1: LTR size
0
COPIER> OPTION> USER> B4-L-CNT
821
8. Service Mode