Checking The Settings - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

2. Securing the Cable of the Voice Guidance
1. Remove the covers of the 4 Cord Guides, and affix
the Cord Guides to the position as shown in the
figure.
2. Fold the Speaker Cable at the [B] part, insert it
through the 4 Cord Guides, and install the 4 Cord
Guide Covers.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord
Guide.
• Do not affix a Cord Guide on the Reader Cable
Cover.
6x

Checking the Settings

NOTE:
When changing the settings upon user's request, it is
required to log in as a system manager in accordance with
instructions from the user administrator.
1. Connect the power plug of the host machine to the
outlet.
2. Turn ON the main power switch.
3. Select Settings/Registration > Preferences >
Accessibility > Voice Navigation Settings > Use
Voice Navigation, and check that the setting is ON.
4. Select Settings/Registration > Preferences >
Accessibility > Voice Navigation Settings > Voice
Guide from Speakers, and check that the setting is
ON.
Reader
Cable Cover
[A]
[B]
Exhaust
Outlet
1076
Operation Check
■ When Using
1. Press "Reset" key for more than 3 seconds.
2. Once the indication on the screen is framed in red,
the "Voice Guidance Kit" becomes enabled.
■ When Stopping to Use
1. Press "Reset" key for more than 3 seconds.
9. Installation