Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 786

COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
UI-CUSTM 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CLN-SEL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SDTM-DSP 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
UI-PPA 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
ON/OFF of custom menu screen display
To set ON/OFF of the custom menu screen display on the Control Panel.
When not displaying the custom menu screen on the Control Panel
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
Set condensation prev:Clean Condensation
To set the effect of drum cleaning for condensation prevention.
When 0 is set, "Clean Drum" is not displayed in [Settings/Registration].
When 1 to 3 is set, "Clean Drum" is displayed and the level of effect of drum cleaning can be set.
As the value is larger, the effect is increased because drum cleaning is executed more frequently,
but cleaning time is increased.
In the case of installation in a low temperature and high humidity environment (in winter), ask for
the user's opinion and configure the setting.
When condensation occurs in a low temperature and high humidity environment
Enter the setting value, and then press OK key.
0 to 3
0: OFF
1: ON (small effect, short cleaning time)
2: ON (moderate effect, medium cleaning time)
3: ON (large effect, long cleaning time)
0
ON/OFF of auto shutdown shift time dspl
To set whether to display [Auto Shutdown Time] and [Auto Shutdown Weekly Timer] in [Settings/
Registration].
Upon user's request
Enter the setting value, and then press OK key.
When 0 is set, automatic shutdown is not executed.
0 to 1
0: OFF, 1: ON
It differs according to the location.
Preferences> Timer/Energy Settings> Auto Shutdown Time, Auto Shutdown Weekly Timer
ON/OFF of PPA screen display
To set whether to display PPA-related information on the Control Panel or remote UI.
The setting is linked with LGCY-SCP. When LGCY-SCP is set to 0, the setting of this item becomes
1. When LGCY-SCP is set to 1, the setting of this item becomes 0.
When not displaying PPA-related information on the screen
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0 (non PPA-installed machine)/1 (PPA-installed machine)
COPIER> OPTION> USER> LGCY-SCP
PPA (Personal Print Application): A function to hold print job. It contains the secured print function.
764
8. Service Mode