Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 287

4. Remove the Vertical Path Roller [1].
CAUTION:
Be careful not to drop off the 2 bushings [2].
5. Remove the 2 bushings [1].
CAUTION:
• Replace the Cassette 1 Vertical Path Roller simultaneously with the Registration Roller as rolling speed is controlled
by the roller consumable amount.
• Marked part must be located on the right side as shown in the figure when installing the roller.
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > VP-FD-RL
VP-FD-RL is also cleared at the same time when R-DOOR is cleared.
4. Parts Replacement and Cleaning
[1]
265
[2]
[1]