Single Pass Dadf-A1,B1 : Scanner Unit (Back Side); Dadf-Av1: Scanner Unit - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

6. Enter the service setting values written on the service label inside of the Reader Front Cover.
COPIER > ADJUST > CCD > 100-RG
COPIER > ADJUST > CCD > 100-GB
COPIER > ADJUST > CCD > SH-TRGT
COPIER > ADJUST > CCD > DFTAR-R
COPIER > ADJUST > CCD > DFTAR-G
COPIER > ADJUST > CCD > DFTAR-B
COPIER > ADJUST > CCD > DFTAR-BW

Single Pass DADF-A1,B1 : Scanner Unit (Back side)

1. Enter the service setting values packaged in the Scanner Unit content.
• COPIER > ADJUST > CCD > 100DF2GB
• COPIER > ADJUST > CCD > 100DF2RG
2. Execute white level adjustment.
Prepare a sheet of A3 or 11x17 size paper.
1. Place the paper on the Copy Board Glass.
• COPIER > FUNCTION > CCD > DF-WLVL1
2. Place the paper on the ADF Document Pickup Tray.
• COPIER > FUNCTION > CCD > DF-WLVL2
3. Place the paper on the Copy Board Glass.
• COPIER > FUNCTION > CCD > DF-WLVL3
4. Place the paper on the ADF Document Pickup Tray.
• COPIER > FUNCTION > CCD > DF-WLVL4
3. Calculate the MTF filter coefficient.
• COPIER > FUNCTION > CCD > MTF-CLC
4. Enter the service setting values written on the service label inside of the Reader Front Cover.
COPIER > ADJUST > 100DF2RG
COPIER > ADJUST > 100DF2GB2
COPIER > ADJUST > DFTBK-G
COPIER > ADJUST > DFTBK-B
COPIER > ADJUST > DFTBK-R
COPIER > ADJUST > DFTBK-BW

DADF-AV1: Scanner Unit

1. Input the service label value bundled in the Scanner Unit content.
• COPIER > ADJUST > CCD > 100-RG
• COPIER > ADJUST > CCD > 100-GB
2. Adjust the shading position.
• COPIER > FUNCTION > INSTALL > RDSHDPOS
3. Adjust the DADF scanning position.
• COPIER > FUNCTION > INSTALL > STRD-POS
4. Adjust the white level.
Set a sheet of A3 or 11x17 paper on the Copy Board Glass.
CAUTION:
White level adjustment may result in failure in the following condition.
• When the white level is adjusted with small width paper.
• When the white level is adjusted with whiteness paper.
1. Set a sheet of paper on the Copy Board Glass.
• COPIER > FUNCTION > CCD > DF-WLVL1
282
5. Adjustment