Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1070

4. Insert a card with a card number that has been
registered, and check that the machine operates
properly.
NOTE:
Perform the following operations to change the number of
cards (the number of departments) after it has been set.
In that case, counter information for each department is
reset.
• Perform the following Service Mode.
COPIER > FUNCTION > CLEAR > CARD
• Turn OFF and then ON the main power switch to
enable the settings.
• After that, perform the setup procedure again from
step 1.
1048
9. Installation