Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1003

● Frequency Test (FREQ)
Of the items indicated below, press one; in response, the DC circuit will be closed and the selected frequency will be transmitted
using the tone transmission function of the modem. You can also monitor the transmission signal by listening to the sound
generated by the speaker. To stop the operation and end test mode, press the
CAUTION:
'RBT' is not currently supported.
● G3 Signal Transmission Test (G3 Tx)
Of the items indicated below, press one. In response, the DC circuit will be closed and the selected frequency will be transmitted
using the G3 signal transmission function of the modem. You can also monitor the transmission signal by listening to the sound
generated by the speaker. To stop the operation and end test mode, press the
Sssw Menu Num Ncu Type IP FAX
<MODEM> <FREQ>
RBT
462Hz
1100Hz
1300Hz
1500Hz
1650Hz
1850Hz
2100Hz
Sssw Menu Num Ncu Type IP FAX Print Clear
<MODEM> <G3TX>
300bps
2400bps
4800bps
7200bps
9600bps
TC7200
TC9600
12000bps
key.
Print Clear Test
<READY>
<1/1>
OK
key.
Test Report
<READY>
<1/2>
OK
981
8. Service Mode
Report