Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1028

■ Setting the Cassette
1.
NOTE:
• Holding the Guide Plate Lever, adjust each Guide
Plate to the specified size.
• Adjust the position of each Guide Plate according to
the paper size.
Trail Edge Guide Plate Lever
Trail Edge
Guide Plate
2.
Side Guide Plate
Side Guide Plate Lever
3.
NOTE:
• Be sure to check with the user before affixing the
Paper Size Label and affix it at the recommended
position.
• Affix the Paper Size Label to each cassette according
to the size of paper being set.
• Keep the Paper Size Labels as they will be used when
changing the paper size.
• Affix the Paper Size Label which is included in the
package of the 2-cassette Pedestal, to the 2-cassette
Pedestal.
USA Only
■ Installing the DADF (Model without
DADF)
Follow the installation procedure shown below to install it
(refer to the Installation Procedure included in the package
of the option).
• Single Pass DADF-B1
• DADF-AV1
■ Installing IC Card Reader (EUR
Only)
NOTE:
Although pictures or illustrations used for explanationmay
differ from the actual things, the procedure is the same.
1006
9. Installation
CA / CSPL /
CHK Only
EUR Only
1x
1x
5.0 mm
1x