Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1105

Document Scan Lock Kit-B2
Points to Note at Installation
• To enable the function of "Image Data Analyzer Board",
it is necessary to install the license which comes with the
product.
• Be sure to ask users to install the license after the
installation.
CAUTION:
Be sure to install the license after installing the Image
Data Analyzer Board because installing the license
before installing the Image Data Analyzer Board
causes an error.
CAUTION:
Marked portion
When tightening the screws, do not tighten them too
tightly. Otherwise, there is a risk of damage and
deformation of screw holes.
Essential Items to Be
Performed Before Installation
• Turn OFF the main power of the host machine, and
disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the
power plug of the host machine, it may cause
electrical shock.
• If disconnecting the power plug without
turning OFF the main power, it may cause
damage of the machine.
• When turning OFF the main power, follow the below
procedure.
1. Turn OFF the main power switch of the host
machine.
2. The display in the Control Panel and the lamp of the
main power are turned off.
Points to Note when turning
ON/OFF the main power
The following message is displayed.
1. When a message prompting to turn OFF and then ON
the main power appears, turn OFF and then ON the main
power switch.
2. If a message prompting the user to update the version
appears, press [Update] to automatically update the
version of this equipment.
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host
machine is started. In the service mode ( Lv.2 ) shown
below, it is possible to set not to display the message.
COPIER > OPTION > FNC-SW > VER-CHNG
Installation Outline Drawing
Checking the Contents
2x
TP; M3x6
1x
1083
9. Installation
2x
1x
1x
1x
2x
Binding
; M3x4
1x
2x
TP; M3x6
2x