Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 868

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
SFT-OUT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
LGCY-SCP 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Supplement/Memo
VC-CNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of offset priority delivery
To set whether to deliver a job where offset and collate/offset group is set to the delivery destination
with offset function.
When 0 is set, a job is delivered to the delivery destination set in [Settings/Registration] even
though the offset function is not available.
When 1 is set, a job is delivered to the delivery destination with offset function even though a
delivery destination without offset function is set in [Settings/Registration].
When preferring to deliver a job to the delivery destination with offset function
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Based on Output Tray Settings, 1: Priority on job settings (deliver to a delivery destination where
offset is possible)
1
Function Settings> Common> Paper Output Settings> Output Tray Settings
Setting of PPA/secured print switch
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to use the PPA function or the conventional secured print function.
Set 0 when using the PPA function. The conventional secured print function is disabled.
Set 1 when using the conventional secured print function (when the EFI Controller is connected,
etc.). The PPA function is disabled.
When IMG-CONT is set to 3 or 4 for connecting the EFI Controller, the setting of this item becomes
1.
When this item is set to 0, the setting of UI-PPA becomes 1. When this item is set to 1, the setting
of UI-PPA becomes 0.
When using the conventional secured print function (when the EFI Controller is connected, etc.)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
The PPA function cannot be used when the EFI Controller is connected.
0 to 1
0: Use the PPA function, 1: Use the conventional secured print function
0
COPIER> OPTION> DSPLY-SW> UI-PPA
COPIER> OPTION> INT-FACE> IMG-CONT
PPA (Personal Print Application): A function to hold print job. It contains the function of secured
print.
Set tiered base pricing oprtn method
To set the operation method of the tiered base pricing.
Name of the tiered base pricing counter displayed on the Check Counter screen is switched
according to the selected operation method.
When starting operation of the tiered base pricing
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Normal charge, 1: Tiered base pricing 1, 2: Tiered base pricing 2, 3: Tiered base pricing 3
0
846
8. Service Mode