Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 788

COPIER (Service mode for printer) > OPTION (Specification setting mode) > DSPLY-SW
PCMP-DSP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
EXTH-SW 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
ERR-DISP 2
SVC-ACA 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Additional Functions
Mode
Supplement/Memo
Set copy cmpl scrn dspl:chg w/devc alone
To set whether to display the screen indicating completion of copying at the time of charging with
a device alone.
When 0 is set, a message "Copying is complete. Do you want to start the job again with the same
settings?" is not displayed in a pop-up screen.
When COIN is 4, this setting is enabled.
Upon user's request
Enter the setting value, and then press OK key.
0 to 1
0: OFF, 1: ON
1
COPIER> OPTION> ACC> COIN
ON/OFF coat 5 UI display: MP Tray pickup
To set whether to display "1-Sided Coated 5" and "2-Sided Coated 5" on the Select Paper screen
at the time of pickup from the Multi-purpose Tray.
When installing the Media Adjustment Kit
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When the Inner Finisher is installed, delivery operation of large paper (257 to 300 g/m2) differs
depending on whether the 3 Way Unit is installed.
- When the 3 Way Unit is installed, paper is delivered to the Second Delivery Tray of the Inner
Finisher.
- When the 3 Way Unit is not installed, job is canceled.
0 to 1
0: OFF, 1: ON
0
Select Paper> Multi-Purpose Tray
[For customization]
Display of ACA installation button
To set whether to display the [Install Auto Configuration Agent] button on the CDS Updater screen
(user mode/service mode).
When switching to install/not to install the ACA via network
Enter the setting value, and then press OK key.
0 to 2
0: Hide (Hide user mode/service mode)
1: Display only service mode (Hide user mode)
2: Display all (Display user mode/service mode)
It differs according to the location.
Service Mode > Updater
Management Settings> License/Other> Register/Update Software
ACA : Auto Configuration Agent
766
8. Service Mode