Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 806

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FEED-SW
TFL-RTC 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
REGASST 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
Set delvry dest at rcvry after tray full
To select the delivery destination for a job with multiple pages after recovering the Delivery Tray
that reaches the full level.
When 0 is set, a job is output from the delivery destination again from which the last job was
delivered.
When 1 is set, a job is output from the delivery destination which priority is set as high at "Output
Tray Settings" in [Settings/Registration].
When changing the delivery tray
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Output from the tray from which the last job was output, 1: Output from the delivery destination
which priority is high among the delivery trays
0
Function Settings> Common> Paper Output Settings> Output Tray Settings
Set pre-registration feed assist control
To set whether to rotate the Multi-purpose Tray Pickup Roller for longer than usual (pre-registration
feed assist control) when feeding paper with 158.6 mm or more in length from the Multi-purpose
Tray.
Set any value other than 1 according to the paper type and paper weight when print displacement
or 0106 jam occurs with heavy paper or coated paper.
0: ON only for heavy paper 7 (257 to 300 g/m2), coated paper 4/5 (221 to 300 g/m2) and custom
size envelope
2: ON only for heavy paper 1 to 7 (106 to 300 g/m2), coated paper 4/5 (221 to 300 g/m2), reply/4
on 1 postcard and standard/custom size envelope
3: ON only for heavy paper 7 (257 to 300 g/m2) and coated paper 1 to 5 (106 to 300 g/m2)
4: ON only for heavy paper 1 to 7 (106 to 300 g/m2), coated paper 1 to 5 (106 to 300 g/m2), reply/
4 on 1 postcard and standard/custom size envelope
As the rotation time of the Multi-purpose Tray Pickup Roller becomes longer, drive noise becomes
louder. If the user concerns the noise, set 1.
- When print displacement or 0106 jam occurs with heavy paper or coated paper
- Upon user's request (to reduce drive noise of the Multi-purpose Tray Pickup Roller)
Enter the setting value, and then press OK key.
Drive noise of the Multi-purpose Tray Pickup Roller becomes louder during execution of pre-
registration feed assist control.
0 to 4
0: ON (heavy paper 7, coated paper 4/5 and custom size envelope only)
1: OFF
2: ON (heavy paper 1 to 7, coated paper 4/5, reply/4 on 1 postcard and standard/custom size
envelope only)
3: ON (heavy paper 7 and coated paper 1 to 5 only)
4: ON (heavy paper 1 to 7, coated paper 1 to 5, reply/4 on 1 postcard and standard/custom size
envelope only)
0
Pre-registration feed assist control: A control to assist feeding of heavy paper and coated paper
by rotating the Multi-purpose Tray Pickup Roller longer than usual at the time of pickup from the
Multi-purpose Tray.
784
8. Service Mode