Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 1077

8.
NOTE:
Use the part removed in step 3.
9.
10.
Connect the power plug to the outlet.
11.
Turn ON the main power switch.
CAUTION:
After completion of this procedure, proceed
to"Operation Check " on page 1055
Operation Check
1. Set the original on the Feeder.
2. Press [Scan and Send] on the Touch Panel Display.
3. Specify the destination and select [Options] > [Finished
Stamp] then press [Close].
4. Press the Start key and check that a stamp is printed on
the original scanned by the Feeder.
1055
9. Installation