Removing The Main Drive Unit - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

3. Remove the Registration Drive Unit [1].
• 2 Screws [2]
• 3 Claws [3]
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > REG-DR-U

Removing the Main Drive Unit

■ Preparation
1. Open the Front Cover.
2. Pull out the Drum Unit by approx. 30mm.
3. Remove the Cover (Rear Upper).
4. Remove the Cover (Rear Lower).
5. Remove the Main Controller
[1]
30mm
PCB."Removing the Main Controller PCB" on page 191
2x
[3]
2x
1x
222
4. Parts Replacement and Cleaning
[2]
[3]