Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 973

OPTION (Specification setting mode)
SORTER (Service mode for delivery options) > OPTION (Specification setting mode)
MD-SPRTN 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
BUFF-SW 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
1SHT-SRT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Additional Functions
Mode
Supplement/Memo
Restricted operation at Finisher error
To set whether to stop the machine when an error occurs at Finisher.
The result set in [Limited Functions Mode] in [Settings/Registration] is displayed.
Set 0 when canceling restriction on operations.
When switching whether to restrict operations for each function, make the setting in [Limited
Functions Mode].
When canceling restriction on operations of the finisher
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Do not set any value other than 0.
0 to 255
0: Normal
1: Function restriction
2 to 255: Not use
0
Management Settings> Device Management> Limited Functions Mode
Set of fin buffer opertn:Fin-AA1
To set ON/OFF of buffer operation in the Finisher.
When 1 is set, the buffer operation is not performed for all modes. The alignment performance is
improved, but the productivity decreases.
When the misalignment of the buffered paper stack occurs on the processing tray
Enter the setting value, and then press OK key.
When the buffer operation is set to OFF, productivity is decreased.
0 to 2
0: ON, 1: OFF, 2: Not used
0
Set collate dvry of 1-sheet:Fin-AA1
To set ON/OFF of collated delivery operation for a sheet of paper.
When 1 is set, the collated delivery operation for a sheet of paper is not performed.
Upon user's request
Enter the setting value, and then press OK key.
The stacking condition decreases when the collated delivery operation for a sheet of paper
enables.
A sheet of paper is delivered by non-sort decreases when the collated delivery operation for a
sheet of paper disables.
0 to 1
0: ON, 1: OFF
0
Setting/Registration> Function Settings> Common> Paper Output Settings> Offset Jobs
The collated delivery operation for a sheet of paper works in the following condition.
The setting of a sheet of paper and a copy
This service mode is ON.
The job from a printer driver
Oddset jobs is ON.
951
8. Service Mode