Cable List - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
...................................................................................................................................................................................................................................
Table 4-1
Cable Cable
number
1 Power input cable (+DC)
2 Power input cable (–DC)
3 Office grounding cable
4 PI cable
5
6 Station alarm cable
7 MDI/MDO cable
8 Straight LA cable
(CAT5 with 4-wire RJ-45/RJ-45 connectors)
8A Crossed LA (CIT) cable
(CAT5 with 4-wire RJ-45/RJ-45 connectors)
9 User byte cable
10 TI-DS1 output cable (100/110 Ω)
11 TI-DS1 input cable (100/110 Ω)
12 TI-E1 output cable (120 Ω)
13 TI-E1 input cable (120 Ω)
14 TI-E1 output cable (75 Ω)
15 TI-E1 input cable (75 Ω)
16 Subrack alarm cable
17 Electrical STM-1e output cable (75 Ω)
18 Electrical STM-1e input cable (75 Ω)
19 Fan power cable (PI/100 – Fan unit)
20 User Panel cable (CI-CTL – UPL)
(Standard: 848811584)
(Halogen free: 848929444)
21 Controller cable (CI-CTL – Fan)
22 DS3/EC1 cable
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009

Cable list

Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Section
"Power wiring (External battery - PDP)"
(p. 4-6)
Procedure 4-2: "Ground wiring" (p. 4-20)
Procedure 4-1: "Power wiring (PDP -
PI/100)" (p. 4-10)
"Station alarm wiring" (p. 4-34)
"Miscellaneous Discrete Inputs/Outputs
(MDIs/MDOs)" (p. 4-52)
"LA 10/100 Base-T interface" (p. 4-71)
"User byte interfaces (G.703/V.11)"
(p. 4-57)
"TI-DS1 Station clock I/O interface
(100/110 Ω)" (p. 4-61)
"TI-E1 Station clock I/O interface (120
Ω)" (p. 4-65)
"TI-E1 Station clock I/O interface (75 Ω)"
(p. 4-68)
Procedure 4-3: "Subrack alarm wiring"
(p. 4-30)
"STM-1e interface" (p. 4-39)
"Power wiring (PI/100 - Fan unit)"
(p. 4-16)
already installed
"Controller cable (CI-CTL – Fan unit)"
(p. 4-27)
"DS3/EC1 interface" (p. 4-49)
Overview
4-3