Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 84

Safety
...................................................................................................................................................................................................................................
Arcing can cause burns to the hands and damage to the eyes.
Before removing or connecting the power supply cable lugs at the Power Interface
(PI/100 OCB), ensure that the power supply line is switched off at the upstream circuit
breaker in the BDFB (Battery Distribution and Fuse Bay) or PDP (Power Distribution
Panel).
Weight
A fully-equipped shelf weighs more than 30 kg (66 lbs) and can cause considerable
injuries if it is knocked over or dropped. This can also cause serious damage to the shelf.
At least two persons are required for lifting the shelf.
Electrostatic discharge (ESD)
Electronic components can be destroyed by electrostatic discharge.
Hold circuit packs only at the edges or on the insertion and removal facilities. Always
observe the ESD instructions (cf.
Disposal
The equipment in the 1675 LambdaUnite MSS system series must be disposed of at the
end of its lifetime. Please contact us in this case and we will arrange for proper and
environment-friendly disposal of your equipment (most parts of the system can be
recycled).
...................................................................................................................................................................................................................................
1-40
DANGER
Power Interface PI/100NOCB: Arcing on removing or connecting live
power supply cable lugs.
WARNING
Risk of injury due to unsecured shelf.
NOTICE
ESD hazard
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Safety requirements in specific deployment phases
"Electrostatic discharge" (p.
Taking out of operation
1-21)).
365-374-198R10.5.4
Issue 1 July 2009