Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 511

Network establishment and testing
...................................................................................................................................................................................................................................
Result:
...................................................................................................................................................................................................
7 Re-install the fiber connection between E-A and E-B.
Result:
and a short traffic interruption of about 15 ms is caused.
...................................................................................................................................................................................................
Click Refresh.
8
Result:
...................................................................................................................................................................................................
Click Close.
9
E
N D O F
...................................................................................................................................................................................................
Manual ring switching
Proceed as follows to test the manual S CP/UPSR ring switching:
...................................................................................................................................................................................................
In the WaveStar
1
Result:
...................................................................................................................................................................................................
Select the existing Path Protection in the Ptn Grp tab on the left-hand side of the
2
window and click the Select button.
...................................................................................................................................................................................................
From the Switch Type list, select Manual To Protection.
3
...................................................................................................................................................................................................
Click Apply and then Yes in the confirmation window.
4
Result:
of about 15 ms is caused.
...................................................................................................................................................................................................
Click Close.
5
...................................................................................................................................................................................................
In the WaveStar
6
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
"Protection" will be indicated as the Active path.
After the defined WTR time (1 minute) a switch back to the "Working" path
"Working" will be indicated as the Active path.
S T E P S
® CIT System View, select Fault → Protection Switch....
The Switch Protection window appears.
An immediate switch to the "Protection" path and a short traffic interruption
® CIT System View, select View → Protection....
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Test procedures
Procedure 10-13: SNCP/UPSR test
10-73