Ds3/Ec1 Cabling Without Rack Extension (Width) - Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual

System cabling and final assembly
...................................................................................................................................................................................................................................
Figure 4-33 DS3/EC1 cabling without rack extension (width)
Cabling of two subracks
If two subracks are used within one rack, a rack extension (width) is required and the
DS3/EC1 cables of both subracks should be led via the rack extension to the top/bottom
of the rack.
After the DS3/EC1 cables have been connected and routed properly the cable bracket
(DC1007325) must still be mounted (see
(p. 4-45)
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
as example). The cable bracket keeps the DS3/EC1 cables within the subrack.
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Figure 4-29, "Mounting of the cable bracket"
External cable installation
DS3/EC1 interface
4-51