Table of Contents
Advertisement
About this document
............................................................................................................................................................................................................................................................
How to use this document
This manual is divided into the following sections with a brief description of the contents
of each major part/chapter/appendix:
About this document
This chapter describes the purpose, intended audience, reason for reissue, and
organization of this document. This section references related documentation and explains
how to order, make comments or recommend changes to this document.
Chapter 1, "Safety"
This chapter provides laser safety information and precautions.
Part I: "Physical and power installation"
Part I covers Chapters 2, 3, and 4. These sections covers the physical mounting of the
Alcatel-Lucent 1850 TSS-60 shelf using the Horizontal Bay Mount. This section includes
the running and connecting of power cables, interconnecting cables, alarm cables, and as
required, external timing, communication cables, and covers initial circuit pack
installation (not seated). This section also provides the recommended checklist
"Installation checklist"
Switch 60 (TSS-60) system. Use of the installation checklist is required to ensure a quality
installation. All completed tasks should be checked off and those not completed should be
duly noted as to the reason why. This checklist should be turned in as part of your job
complete paperwork.
Chapter 2, "Physical installation"
This chapter provides equipment installation instructions for the Alcatel-Lucent 1850
TSS-60 shelf using the horizontal bay mount configuration. The Alcatel-Lucent 1850
TSS-60 shelves with the removable center divider can support either half width or full
width cards in the Main function slots.
Chapter 3, "Cable and fiber installation"
This chapter provides cabling instructions for the Alcatel-Lucent 1850 TSS-60 shelf using
the horizontal bay mount configuration.
Chapter 4, "Circuit pack installation"
This chapter provides information for verifying that the shelf is being supplied with the
proper power and provides instructions for circuit pack installation.
............................................................................................................................................................................................................................................................
x i i
to follow when installing a Alcatel-Lucent 1850 Transport Service
365-372-603R2.0
Issue 1 January 2009
Advertisement
Table of Contents
