Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 348

NE provisioning
...................................................................................................................................................................................................................................
Figure 7-4 WaveStar
The following figure gives an example on conneting the WaveStar
network (Intranet).
Figure 7-5 WaveStar
Before establishing a connection via this connection type, an entry in the WaveStar
address list has to be created, containing the TID and the TCP/IP address for the E.
After that a seperate view has to be created for the E.
Important! When IP traffic is enabled for a LA port of the E (see section
Procedure 7-5: "LA port configuration for TCP/IP access" (p.
not respond to a ping unless also the TTD function is enabled. In order to be able to
ping the E you need to have a LA provisioned for IP and the TTD function
enabled.
...................................................................................................................................................................................................................................
7-6
®
CIT access via TCP/IP
NE
®
CIT access via IP network (Intranet)
NE
IP Network
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
®
Connecting the WaveStar
®
CIT through an IP
7-23)) the system will
365-374-198R10.5.4
Issue 1 July 2009
NE login
CIT to the NE
®
CIT