Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 421

Stand-alone test procedures
...................................................................................................................................................................................................................................
...................................................................................................................................................................................................
In the XC Application group box, select 1-Way Point-to-Point.
4
...................................................................................................................................................................................................
Click the left Select button to select the source tributary.
5
Result:
...................................................................................................................................................................................................
Select one port in the list or enter the AID in the Enter AID text box above.
6
Result:
the respective port are displayed.
...................................................................................................................................................................................................
Select the VC/STS which shall be used as the source and click the Select button.
7
...................................................................................................................................................................................................
Select the destination port in the Ptn Grp selection tab and the corresponding VC/STS in
8
the Tributary list box.
...................................................................................................................................................................................................
Click the Select button.
9
Result:
...................................................................................................................................................................................................
Select NORM as Output Mode in the Source to Destination and Destination to
10
Source group boxes.
...................................................................................................................................................................................................
Type a 9-digit number for the cross-connection in the XC Number field or use the
11
automatically generated one.
...................................................................................................................................................................................................
Click the Apply button to apply your settings and confirm the resulting message by
12
clicking Yes.
...................................................................................................................................................................................................
13 Repeat
setup.
Important! In
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
The Ptn Grp selection tab appears.
In the Tributary list box on the right, the AIDs of all VCs/STSs belonging to
The current data of the cross-connection are displayed.
Step 3 to Step 12 for all the other required cross-connections according to the test
Step 3 use always the same cross-connection rate!
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Procedure 8-7: Optical port transmission test (daisy chain
test)
8-35