Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 227

System cabling and final assembly
...................................................................................................................................................................................................................................
User byte interfaces (G.703/V.11)
Overview
The six user byte interfaces provide the user data channels. If required, an external
orderwire equipment can be connected to these interfaces.
There are four universal interfaces which can be used as G.703 co-directional or V.11
contra-directional interfaces. Two interfaces can be used as V.11 only.
User bytes
The following interfaces can be used as G.703 or V.11:
• USERBIO1
• USERBIO2
• USERBIO3
• USERBIO4
The following interfaces can only be used as V.11:
• USERBIO5
• USERBIO6.
Cable data
Length of pre-fabricated UTP cables, 100 , 8 pairs + overall screen:
• 10 m [32.808 ft] User byte cable, G.703/V.11 — CC109155523
• 25 m [82.021 ft] User byte cable, G.703/V.11 — CC109155531
• 50 m [164.042 ft] User byte cable, G.703/V.11 — CC109155549
• 75 m [246.063 ft] User byte cable, G.703/V.11 — CC109164228
• 100 m [328.08 ft] User byte cable, G.703/V.11 — CC109164236
Connector data
The user byte cables have a 15-pin SUB-D connector (male).
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
External cable installation
User byte interfaces (G.703/V.11)
4-57