Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 79

Safety
...................................................................................................................................................................................................................................
Arcing can cause burns to the hands and damage to the eyes.
Before removing or connecting the power supply cable lugs at the Power Interface
(PI/100 OCB), ensure that the power supply line is switched off at the upstream circuit
breaker in the BDFB (Battery Distribution and Fuse Bay) or PDP (Power Distribution
Panel).
Laser warning labels
Warning labels on the system and especially on the optical components warn of the
dangers of invisible laser radiation. Removed, concealed or illegible labels can lead to
incorrect action and thus cause serious injuries to the eyes of operating staff.
Ensure that the laser warning labels are not removed or concealed and always clearly
legible.
Electrostatic discharge (ESD)
Electronic components can be destroyed by electrostatic discharge.
Circuit packs must therefore always be kept in antistatic covers. Use the original
antistatic packaging if possible. Always observe the ESD instructions (cf.
discharge" (p.
...................................................................................................................................................................................................................................
365-374-198R10.5.4
Issue 1 July 2009
DANGER
Power Interface PI/100NOCB: Arcing on removing or connecting live
power supply cable lugs.
WARNING
Laser hazard
NOTICE
ESD hazard
1-21)).
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Safety requirements in specific deployment phases
Operation and maintenance
"Electrostatic
1-35