...................................................................................................................................................................................................................................

IF ...

rack extensions (width) are used

...................................................................................................................................................................................................

Put the bushings (= spacers) for adapter kit (CC848316279, item 1) in the rack frame or

rack extension and fix them by using CH SCR, STL ST-70, M4 × 25 screws

(CC847117900, item 2) and STL, ST-70-140HV, 4.3 × 12 washers (CC847174950, item

3) in each nut retainer-position as shown in the figures below.

...................................................................................................................................................................................................

Tighten the CH SCR, STL ST-70, M4 × 25 screws (CC847117900, item 2).

N D

O F

S T E P S

Layout

Figure 3-31 Rack line-up without rack extensions (width)

3-52

THEN ...

place the rack extension of the extension rack next to the

rack extension (item 5) of the existing rack.

Alcatel-Lucent – Internal

Proprietary – Use pursuant to Company instruction