Alcatel-Lucent 1675 LambdaUnite Installation And System Turn-Up Manual page 370

NE provisioning
...................................................................................................................................................................................................................................
Investigating the IP address of the WaveStar
• From the Windows
• In the Control Panel, double-click Network (or Network and Dial-up
• Select TCP/IP Protocol and click Properties.
• In the IP address tab the IP address of the PC is displayed.
...................................................................................................................................................................................................
30 To add a host to the list, click the symbol to the left of an empty entry in the list.
Result:
...................................................................................................................................................................................................
Enter the IP address of the host (e.g. WaveStar
31
select TL1 Maintenance in the New OS Types list.
...................................................................................................................................................................................................
Click Add.
32
Result:
new entry is displayed in the TCP/IP Gateway Host List.
...................................................................................................................................................................................................
Click Apply and then Yes in the confirmation window.
33
...................................................................................................................................................................................................
Click Close.
34
E
N D O F
...................................................................................................................................................................................................
...................................................................................................................................................................................................................................
7-28
®
Start button, select Settings → Control Panel.
Connections or Network Management, select the respective Internet
connection) and then select the Protocols tab.
The Edit IP Address and OS type for system window appears.
The Edit IP Address and OS type for system window is closed and the
S T E P S
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
Provisioning system parameters
Procedure 7-5: LAN port configuration for TCP/IP access
®
CIT In general proceed as follows:
® CIT) in the New IP Address field and
365-374-198R10.5.4
Issue 1 July 2009