How To Order; Drive Configurator - Danfoss VLT AutomationDrive FC 300 Design Manual

FC 300 Design Guide

How to Order

Drive Configurator

"
It is possible to design an FC 300 adjustable frequency drive by using the ordering number system.
For the FC 300 Series, you can order standard and with integral options by sending a type-code
string describing the product to the local Danfoss sales office, i.e.:
FC-302PK75T5E20H1BGCXXXSXXXXA0BXCXXXXD0
The meaning of the characters in the string can be located in the pages containing the
ordering numbers in the chapter How to Select Your VLT. In the example above, a Profibus
DP V1 and a 24 V backup option is included in the drive.
Ordering numbers for FC 300 standard variants can also be located in the chapter How to Select Your VLT.
From the internet-based product configurator, the Drive Configurator, you can configure the
right drive for the right application and generate the type code string. If the variant has been
ordered once before, the configurator will automatically generate an eight-digit sales number.
The sales number can be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales representative.
The Drive Configurator can be found on the global internet site: www.danfoss.com/drives.
79
MG.33.B3.22 - VLT is a registered Danfoss trademark