Danfoss VLT AutomationDrive FC 300 Design Manual page 213

FC 300 Design Guide
15-63 Option Serial No
Function:
Shows the option slot A serial number.
15-70 Option in Slot A
Function:
Shows the type code string for the options (CXXXX
if no option) and the translation i.e. "No option".
15-71 Slot A Option SW Version
Function:
Shows the option slot C software version.
15-72 Option in Slot B
Function:
Shows the option slot C ordering number.
15-73 Slot B Option SW Version
Function:
Shows the option slot C serial number.
15-74 Option in Slot C
Function:
Shows the typecode string for the options (CXXXX
if no option) and the translation i.e. No option.
15-75 Slot C Option SW Version
Function:
Shows the type code string for the option (DX if no
option) and the translation i.e. "No option".
15-9* Parameter Info
"
15-92 Defined Parameters
Array [1000]
Range:
0 - 9999
Function:
Contains a list of all defined parameters in the
drive. The list ends with 0.
15-93 Modified Parameters
Array [1000]
* default setting ( )
How to Program
display text [ ] value for use in communication via serial communication port
MG.33.B3.22 - VLT is a registered Danfoss trademark
Range:
0 - 9999
Function:
Contains a list of the parameters that are changed
compared to default setting. The list ends with
0.The list is updated regularly, so a change might
not be reflected until after 30s.
15-99 Parameter Metadata
Array [23]
Option:
0 - 9999
Function:
For use by MCT10.
*
0
*
0
*
0
213