Table of Contents
Advertisement
Automation VT Drive FC322 Design Guide
4 How to Order
4.1 Ordering Form
4.1.1 Drive Configurator
It is possible to design a VLT Automation VT Drive frequency converter according to the application requirements by using the ordering number system.
For the VLT Automation VT Drive, you can order standard drives and drives with integral options by sending a type code string describing the product a
to the Danfoss sales office, i.e.:
FC-322P18KT4E21H1XGCXXXSXXXXAGBKCXXXXDX
The meaning of the characters in the string can be located in the pages containing the ordering numbers in the chapter
example above, a Profibus LON works option and a General purpose I/O option is included in the drive.
Ordering numbers for VLT Automation VT Drive standard variants can also be located in the chapter
From the Internet based Drive Configurator, you can configure the right drive for the right application and generate the type code string. The Drive
Configurator will automatically generate an eight-digit sales number to be delivered to your local sales office.
Furthermore, you can establish a project list with several products and send it to a Danfoss sales representative.
The Drive Configurator can be found on the global Internet site: www.danfoss.com/drives.
MG.20.X1.22 - VLT
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20783-Danfoss-131X8145-VLT-Automation-VT-Drive-VFD-FC322-460V-.5-HP.aspx
4 How to Order
How to Select Your VLT
How to Select Your VLT
.
®
is a registered Danfoss trademark
4
. In the
107
Advertisement
Table of Contents
