Hard Disk Drive Assembly ( Part No:5315113); Tools; Needed Manpower; Preparations - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
8-4-11

HARD DISK DRIVE ASSEMBLY ( PART NO:5315113)

8-4-11-1

Tools

• Common Phillips screwdrivers
8-4-11-2

Needed Manpower

• 1person, 15 minutes
8-4-11-3

Preparations

Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system
8-4-11-4

Removal Procedure

1) Remove Right side cover and Right side EMI cover. Refer Section
2) Loosen the One screw (A) and pull out the hard disk drive assembly as shown in
Figure 8-61 on page 8-53
PROPRIETARY TO GE
8
EVISION
Figure 8-61 Removing Hard Disk Drive Power cable
Chapter 8 Replacement Procedures
LOGIQ P3 S
ERVICE
8-4-8 on page 8-44
Screw (A)
HDD Power cable
M
ANUAL
8-53