Electrical Safety; Labels Locations - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
1-3-4

Electrical Safety

To minimize shock hazard, the equipment chassis must be connected to an electrical ground. The
system is equipped with a three-conductor AC power cable. This must be plugged into an approved
electrical outlet with protective ground.
The power outlet used for this equipment should not be shared with other types of equipment.
Both the system power cable and the power connector meet international electrical standards.
1-3-5

Labels Locations

PROPRIETARY TO GE
8
EVISION
Figure 1-1 Label Location for LOGIQ P3
Chapter 1 Introduction
LOGIQ P3 S M
ERVICE ANUAL
1-11