Right Emi Cover; Tools; Needed Manpower; Preparations - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
8-4-8 Right EMI Cover (P/N: 5308965 - Not a FRU; Part of EMI Cover Assy FRU P/N:
5315111)
This is a description on how to remove and replace the Right EMI Cover.
8-4-8-1

Tools

• Common phillips screwdrivers
8-4-8-2

Needed Manpower

• 1 person, 15 minutes
8-4-8-3

Preparations

• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-4-8-4

Removal Procedure

1) Remove Right cover. Refer
2) Use the scewdriver and Loose the eight screws (1,2,3,4,5,6,7,8)
3) Slide and remove RH-side EMI cover. Refer
Right cover.
8-4-8-5

Mounting procedure

Install the new parts in the reverse order of removal
8-44
PROPRIETARY TO GE
8
EVISION
section 8-4-3 on page 35
4
3
Slide to right to re-install cover
2
Slide to left to remove the cover
1
Figure 8-50 RH-side EMI cover
Section 8-4 - Mechanicals
for details on how to remove Right cover.
Figure 8-50 on page 8-44
5
6
7
8
LOGIQ P3 S M
ERVICE ANUAL
for details on how to remove
RH-side
EMI cover