GE
D
5308917-100, R
IRECTION
8-4-4
Front Cover (FRU No.5315116)
This is a description on how to remove and replace the Front Cover.
8-4-4-1
Tools
•
Common Phillips screwdrivers
8-4-4-2
Needed Manpower
•
1 persons, 15 minutes
8-4-4-3
Preparations
•
Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-4-4-4
Removal Procedure
1) Remove the RH-side cover from the
2) Remove the LH-side cover from the
3)Remove the two screws (A,B) LH- side of the system. Refer
PROPRIETARY TO GE
8
EVISION
Figure 8-40 Front cover
Chapter 8 Replacement Procedures
system.Refer section 8-4-1 on page 32
system.Refer section 8-4-2 on page 34
Front Cover
Figure 8-41 on page 8-38
LOGIQ P3 S
M
ERVICE
ANUAL
8-37
Need help?
Do you have a question about the LOGIQ P3 PRO and is the answer not in the manual?