Peripheral/Option Checks; Input Power; Ac Power Inspection - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
10-5-2-2

Peripheral/Option Checks

If any peripherals or options are not part of the system configuration, the check can be omitted. Refer
to the User Manual for a list of approved peripherals/options.
Table 10-8
Step
1 B/W Printer Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2 Color Printer Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3
4 Footswitch
5
6
10-5-3

Input Power

10-5-3-1

AC Power Inspection

Table 10-9
Step
1 Unplug Cord Disconnect the mains cable from the wall and system.
2
3
10-5-4 Cleaning
10-5-4-1 General Cleaning
Table 10-10 General Cleaning
Step
1 Console
2 Probe Holder Clean probe holders. (they may need to be soaked to remove excess gel).
3
PROPRIETARY TO GE
8
EVISION
GE Approved Peripheral/Hardware Option Functional Checks
Item
DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
Verify that the footswitch is functioning as programed. Clean as necessary.
ECG
Verify basic operation with customer.
DVD
Verify that the DVD is functioning properly. Clean heads and covers if necessary.
AC Inspection
Item
Inspect
Inspect it and its connectors for damage of any kinds.
Verify that the LINE wires are properly attached to the terminals, and that no strands may cause a short
Verify
circuit.
Item
Use a fluid detergent in warm water on a soft, damp cloth to carefully wipe the entire system. Be careful
not to get the cloth too wet so that moisture does not enter the console.
Use a soft, non-abrasive folder cloth. Gently wipe the LCD face. DO NOT use a glass cleaner that has a
LCD
hydrocarbon base (such as Benzene, Methy Alcohol or Methy Ethyl Ketone) on LCD with the filter (anti-
glare shield).
Chapter 10 Care & Maintenance
LOGIQ P3 S
Description
Description
Description
M
ERVICE ANUAL
10-9