Mounting Procedure - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
4) Remove Rear panel assembly from the system Slide upwards as shown below
8-62
5) LOGIQ P3 - Disconnect the FRC cable, Power cable & USB Cables from rear pannel assembly.
Refer Figure 8-70 on page 8-62
8-5-4-5

Mounting procedure

1.) Install the new parts in the reverse order of removal.
8-62
PROPRIETARY TO GE
8
EVISION
Figure 8-69 Removing Rear panel assembly
Figure 8-70 Removing FRC & USB cables
Section 8-5 - USB Cable Set (FRU P/N: 5315039)
LOGIQ P3 S
ERVICE
Figure 8-69 on page
A
M
ANUAL