Cwd Assy (Fru No: 5124847); Tools; Needed Manpower; Preparations - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
8-13-1

CWD Assy (FRU No: 5124847)

Purpose: This is a description on how to remove and replace the CWD Assy.
8-13-1-1

Tools

• Common phillips screwdrivers
• Allen/Unbraco wrench
8-13-1-2

Needed Manpower

• 1 person, 30 minutes + travel
8-13-1-3

Preparations

• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
Figure 8-92 Removal Procedure of cwd Refer to
1.) Unscrew two screws(1-2).
2.) Disconnect the CWD assy.
8-13-1-4

Removal procedure

Refer to
1.) Unscrew two screws (1-2) to remove the CWD cover. see
2.) Connect the CWD assy to RX64. [See
3.) Press the CWD assy tightenedly, refer to
4.) Screw two screws (1-2) to fix the CWD assy on RX64 assy., see
PROPRIETARY TO GE
8
EVISION
8-13-1 on page 8-91 .
Chapter 8 Replacement Procedures
8-13-1 on page 8-91
8-13-1 on page 8-91
8-13-1 on page 8-91 ]
8-13-1 on page 8-91 .
LOGIQ P3 S
ERVICE
.
]
8-13-1 on page 8-91 ]
M
ANUAL
8-91