Mounting Procedure; Functional Checkout Procedure - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
9) Loosen the two screw of (A,B) of LCD monitor Arm.Refer
10) Lift the LCD Assembly upward to remove it from the system. Refer
8-2-4-5

Mounting Procedure

1) Install the new parts in the reverse order of removal.
8-2-4-6

Functional Checkout Procedure

See Section Functional Test
4-3-1 Power On/Boot Up
Power Off/
4-3-2 Shutdown
Adjusting the
4-3-4 Display Monitor
PROPRIETARY TO GE
8
EVISION
A
Figure 8-6 LCD monitor neck
Figure 8-7 Lift LCD monitor
Service Manual Direction 5308917-100, Section 8-2-3. Equipment passes all required tests and is
Chapter 8 Replacement Procedures
Figure 8-6 on page 8-7
B
Debrief Script
ready for use.
LOGIQ P3 S M
ERVICE
Figure 8-7 on page 8-7
ANUAL
8-7