Caster Wheel Front (Fru P/N :5315118 - Lp3, 5368246 - Lp3Bt10) / Caster Wheel; Rear (Fru P/N: 5315119 - Lp3, 5368247 - Lp3 Bt10); Tools; Needed Manpower - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
8-4-6

Caster Wheel Front (FRU P/N :5315118 - LP3, 5368246 - LP3BT10) / Caster Wheel

Rear (FRU P/N: 5315119 - LP3, 5368247 - LP3 BT10)

This is a description on how to remove and replace the castor wheel front and castor wheel rear .
8-4-6-1

Tools

• Common Phillips screwdrivers; Allen Key Set.
8-4-6-2

Needed Manpower

• 1person, 15 minutes each
8-4-6-3

Preparations

• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-4-6-4

Removal Procedure

1) Remove the Transformer assy. Refer
2) Lift the system slightly up on the side of the castor wheel that needs replacement
3) Place a small block of the size of castor wheel to balance the system
4) Using the allen key set, unfasten the 4 Hex screws holding the Castor wheel and remove it
Refer Figure 8-48 on page 8-42
8-4-6-5

Mounting procedure

1.) Install the new parts in the reverse order of removal.
8-4-6-6

Functional Checkout Procedure

Do Visual Inspectionand roll system
around and ensure smooth wheel
rotation and sweivwl
8-42
PROPRIETARY TO GE
8
EVISION
Figure 8-48 Castor wheel
Functional Test
Service Manual Direction 5308917-100, Section 8-4-6. Equipment passes all required
Section 8-4 - Mechanicals
section 8-7-1 on page 76
Debrief Script
tests and is ready for use.
LOGIQ P3 S M
ERVICE ANUAL