General Information - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
5-1-3

General Information

• LOGIQ P3 is an ultrasound imaging scanner.
• The system can be used for:
-
-
-
-
-
• LOGIQ P3 is a digital beam forming system that can handle up to 192 elements linear probes.
• Signal flow from the Probe Connector Panel to the Front End, to the Mid Processors and (TMST)
and finally to the LCD and peripherals.
• System configuration is stored on a hard disk and all necessary software is loaded from the hard
disk on power up.
5-4
PROPRIETARY TO GE
8
EVISION
2D Black and White imaging
2D Color Flow
M-Mode Black and White imaging
Doppler
A number of combinations of the above
Section 5-1 - Overview
LOGIQ P3 S M
ERVICE ANUAL