GE
D
5308917-100, R
IRECTION
6.) Fix back the 4 screws that were removed in Step#3 above.
7.) Fix back all the cable connectors that were removed in Step#2 above. Ensure that the connectors
are fixed to their respective positions.
8.) Attach the keyboard top cover that was removed in Step#1 above.
8-2-10-1
Mounting procedure
1.) Install the new parts in the reverse order of removal.
8-2-10-2
Functional Checkout Procedure
See
Section
4-3-1
4-3-2
4-3-6
PROPRIETARY TO GE
8
EVISION
Figure 8-27 Controller board position
Functional Test
Power On/Boot Up
Service Manual Direction 5308917-100, Section 8-2-7. Equipment passes all required
Power Off/ Shutdown
B Mode Checks
Chapter 8 Replacement Procedures
LOGIQ P3 S
Debrief Script
tests and is ready for use.
M
ERVICE
ANUAL
8-23