System Doesn't Boot - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
7-6-1-1 System Doesn't Boot (cont'd)
System doesn't boot! (con'd)
YES
Is BIOS screen displayed
on the LCD?
Is "LOGIQ P3" starting to
display on the LCD?
YES
Go to Scan Procedure section.
PROPRIETARY TO GE
8
EVISION
NO
Is BIOS screen displayed
on external Monitor?
YES
1) Check LCD brightness.
2) Check LCD Power & Signal
Cable.
3) Check LCD & Replace if found
defective else replace MST+DCK.
Reboot the system and Reload
Figure 7-8 System Doesn't Boot (cont'd)
Chapter 7 Diagnostics/Troubleshooting
NO
Check flat Ribbon
cable B/W DCK & RPI
Reboot system, if still
can't boot up, please
replace TMST assy.
NO
latest system & Application
software with DVD-RW.
LOGIQ P3 S
ERVICE
NO
Replace
YES
TMST PWA.
M
ANUAL
7-11