Keyboard Rear Cover Assy (Fru P/N: 5315122); Tools; Needed Manpower; Preparations - GE LOGIQ P3 PRO Service Manual

GE
D 5308917-100, R
IRECTION
Section 8-3
Keyboard
This is a description on how to remove and replace the keyboard cover Assembly.
8-3-0-1

Tools

• Common phillips screwdrivers
8-3-0-2

Needed Manpower

• 1 person, 15 minutes
8-3-0-3

Preparations

• Shutdown the system and switch off the main Circuit Breaker at the bottom rear side of the system.
8-3-0-4

Removal procedure

1) Remove Keyboard assembly. Refer Section 8-2-6
2) Remove the 2 screws (A,B) as shown in the figure above.
3) Remove LCD Arm cover as mentioned. Refer
8-28
PROPRIETARY TO GE
8
EVISION
Rear Cover Assy (FRU P/N: 5315122)
A
Figure 8-30 Keyboard
Section 8-3 - Keyboard Rear Cover Assy (FRU P/N: 5315122)
B
section 8-2-4 on page 8- 7
LOGIQ P3 S M
ERVICE ANUAL